Nambour 07 54762899 | Noosaville 07 54424833 sales@soundinmotion.com.au

Alpine MRV-M1200 Mono V-Power Digital Amplifier

$599.00

Don’t let its small size fool you, this amplifier was specifically engineered to offer performance, sound quality and reliability – all meeting Alpine’s high standards.

 

Sound In Motion, the Home of Alpine on the Sunshine Coast

Description

Alpine MRV-M1200

Mono V-Power Digital Amplifier

CARRYING ON THE V-POWER’S REPUTATION OF VALUE AND RELIABILITY.

 

MRV-M1200_AGL_GROUP-1024x576

Tens of thousands have relied on Alpine V-Power amplifiers for dependable, quality power.

Now in their fourth generation, Alpine V-Power amplifiers carry on this heritage and prove that playing strong never looked our sounded better.

Yes, it is possible to improve upon a good thing.

RAISING THE BAR

The new Alpine MRV-M1200 V-Power amplifiers is a Class D digital amplifier, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets.

Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers.

Translation: Enjoy cleaner bass, even during extreme power demands.

BIG POWER, SMALL PACKAGE

The Alpine V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

ENHANCED SHUT DOWN PERFORMANCE

No shut down!

You get longer time until protection mode kicks in. It is a gradual gain down, no abrupt interruptions in playback.

GREATER HEAT PROTECTION

Greatly improved heat sink capacity for improved shutdown performance.

The Alpine MRV-M1200’s heat sink is over 30% larger in volume than that of its predecessor, the MRX-M110.

REMOTE BASS LEVEL ADJUSTMENT

Adjust the subwoofer level without having to access the amplifier itself. Simply use the enclosed Alpine RUX-KNOB bass knob and get full control for remote on-the-fly bass adjustments.

You also have the ability to control up to ten V-Power mono amps from just one Alpine RUX-KNOB controller with simple telephone jack adapters.

The RUX-KNOB is compatible with all Mono and 5-channel V-Power models.

PROVEN POWER

Each V-Power amplifier comes with its very own birth-sheet.

Alpine V-Power amplifiers are tested and documented to show their true actual output.

mrvm12002

Features and Specifications

SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 600W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

RMS Power Ratings

  • Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N)

Sound Tuning

  • Crossover Frequency (LPF): 50 – 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz

Dimensions

  • Foot Print (WxHxD) mm: 342 x 55 x 219 mm
  • Foot Print (WxHxD) in: 13-1/2” x 2-1/4” x 8-5/8”

General

  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.15 – 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.4 – 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
  • THD+N (10W into 4 Ohms): ?0.02 %
  • THD+N (10W into 2 Ohms): ?0.03 %
  • THD+N (Rated Power into 4 Ohms): ?0.2 %
  • THD+N (Rated Power into 2 Ohms): ?0.3 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >750
  • Signal to Noise (1W into 4 Ohms): >85 dB
  • Signal to Noise (Rated Power into 4 Ohms): >105 dB
  • Preamp Output: 4.0V Max.
  • Remote Level: -20 to 0 dB
  • Weight: 1.8 kg

 

FEATURES

Install

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Power Supply: MOSFET
  • Pre-Amp Stage: Discrete
  • Final Outputs: Power MOSFET
  • Crossover: Variable Lowpass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Bass EQ: Bass EQ Function
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • Low-impedance Possibility:
  • Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • RCA Output: Non-Fading Pre-Amp Output (4 Volts)
  • Speaker-Level Inputs: 4-channel Speaker Level Inputs
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Thermal Control: Multi-stage Power Limits

 

Sound In Motion, your local Authorised Premium Alpine Dealers, Stockists and Installation centres on the Sunshine Coast

You may also like…