Nambour 07 54762899 | Noosaville 07 54424833 sales@soundinmotion.com.au
Sale!
PDX-F6GC_600x600
Alpine PDXF6GC

Alpine PDX-F6GC Professional Series 4chl Amplifier

$949.00 $649.00

 

Premium 4 channel Amplifier

 

Sound In Motion the Home of Alpine on the Sunshine Coast

 

Product Description

Alpine PDX-F6GC Professional Series

Premium 4chl Amplifier

The all-new PDX series are the first ever class-D amplifiers to triumph sound purity and power efficiency.

Alpine PDX-F6GC - 4Channel Amplifier - Sound In Motion

The PDX Professional Series are a special collection that elevates PDX amplifiers to new heights of prestige with their new luxurious and gorgeous gold aluminium finish.

The first true audiophile D-class amplifiers have never been so remarkably beautiful and elegant.

Incorporating new technology to maximise sonic quality, the new PDX amplifiers deliver extremely low distortion levels, wide bandwidth and industry leading S/N ratios. The new PDX amplifiers have an exceptionally high damping factor, more than 500 for the 4-channel Alpine PDX-F6GC.

What’s more, the all-new PDX amplifiers are 20% smaller than the first generation models and their unique stacking design allows for a large multi amplifier system to be installed virtually anywhere.

With precision design and UltraBlu technology PDX deliver unsurpassed definition. Rivalling even the best high-end amplifiers, PDX set the benchmark with a frequency range of 5Hz-400Hz (mono) and 5Hz-100kHz (4ch).

Unique to PDX, distortion decreases at higher frequencies, resulting in a clean signal where your ear is most sensitive to distortion. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power. What’s more, PDX are capalable of S/N ratios up to 123dB S/N ar rated power for unprecedented clarity.

Delivering ultra-low impedance, PDX are highly stable for tight bass and superb sound with a dampening factor rating at >1000 (Mono) and >500 (4ch). With tremendous headroom and low distortion, PDX have a high total system efficiency of ~80% (power supply >90%, output stage >90%).

PDX. The new rival in audiophile amplifiers.

Noteworthy Awards

The Alpine PDX Audiophile Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category.

Alpine PDXF6GC

New Reference Grade Output Stage

Ultra-Wide Frequency Response

ultra-wide-freq-response

This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB).

 

 

 

Total Harmonic Distortion(THD+N) vs. Power

total-harmonic-distortion-thd-n-vs-power

 

The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for both low distortion and wide frequency response.

These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, and PDX-F4 are synonymous with extremely high resolution and detail.

 

 

Total Harmonic Distortion(THD+N) vs. Frequency

total-harmonic-distortion-thd-n-vs-frequencyUniquely PDX, distortion actually decreases at higher frequencies, resulting in a clean and clear signal where your ear is most sensitive to distortion. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power.

Signal to Noise

These amps are capable of unheard of S/N ratios up to 95dB S/N @ 1W, 122dB S/N at rated power for extremely clean, uncolored sound. Forget unwanted background noise or static. The PDX amps deliver crystal clear music every time.

Damping Factor

With ultra-low output impedance, the new PDX offers extremely controlled, tight bass for unprecedented sound quality. Ratings are >1000 for Mono and >500 for 4ch.

 

Power Output to the Extreme

Beefed up Power

pdx-beefed-up-powerThe PDX power supply delivers tremendous headroom with low distortion and noise. PDX amplifiers have an extremely high total system efficiency of ~80% (power supply is rated at >90%, output stage is rated >90%).

 

 

 

If the amp gets too hot, the Thermal Protection circuit kicks in and gradually decreases output power until it cools down. Once cool, the power output automatically increases back to the previous level. If the circuit detects a Low Battery condition, it will gradually decrease power output if battery voltage becomes too low. Once the battery voltage increases, power will be restored. This interruption-free design allows for non-stop enjoyment with no hiccups or drop-outs, just clean, clear output.

 

Low Impedance Stability

These amps are stable at low impedances and are capable of their rated power from 2 to 4 ohms for all models. This allows excellent flexibility with multiple speaker and subwoofer loads and is adjusted automatically.

Certified Power From Birth, GuaranteedEach PDX amplifier comes with its very own birth-sheet. PDX amplifiers are tested and documented to show their true actual output.

Power Management Processor

 

pdx-power-management-processorPDX amps incorporate Alpine’s new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature and output to ensure uninterrupted power output for non-stop listening.

 

 

 

Application Flexibility

Unique Stacking System

unique-stacking-systemThe new PDX series amplifiers are 20% thinner than previous models at only 2” thick. New stacking system packs the amps closer together so there are no gaps and to save space in the trunk while directly coupling the amps heatsinks to help share cooling duties.

 

 

 

Speaker terminals

speaker-terminalsThe super high power speaker connectors allow for up to 8GA wiring and have a unique quick disconnect design for simple error-free installation

 

 

 

 

Power Connector

power-connector

The new removable connector features a low-loss, high-current design. It accepts up to 4GA wire, to ensure your amp gets the power it needs while allowing for easy installation.

 

 

 

 

 

 

 

Remote Control Bass Knob (RUX-KNOB)

rux_knobSimply add the RUX-KNOB (sold separately),and get full control from the dash for remote on-the-fly bass adjustments. You also have the ability to control multiple amps from just one controller with simple telephone cord adapters.

 

 

 

 

A Touch of Personalization

pdx-trim-personalisationPDX amplifiers come with removable trim rings, allowing them to be easily custom painted to match your vehicle or personalized to anything you want. Add it as another Do-It-Yourself project, or leave it to professionals and ask one of our team members to assist you.

 

 

Alpine PDX-F6GC – Features

Install

  • Connectors: Quick Disconnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4/3/2 Channel
  • Thermal Protection
  • Low-battery Protection
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Circuit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • Crossover: Adjustable High Pass, Low Pass
  • Pre-Amp Stage: Discrete
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable

Alpine PDX-F6GC – Specifications

RMS Continuous Power (at 14.4 V)

  • Per Channel into 4 ohms: 150 W x 4
  • Per Channel into 2 ohms: 150 W x 4
  • Bridged into 4 ohms: 300 W x 2
  • THD + N (Reference: 10 W / rated power into 4 ohms): 0.003 % / 0.05 %
  • S/N Ratio (IHF A Weighted, Reference: rated power into 4 ohms): 118 dBA
  • S/N Ratio (IHF A Weighted, Reference: 1 W into 4 ohms): 96 dBA
  • Input Impendance: 10k ohms
  • Frequency Response (Reference: 1 W into 4 ohms): 5 Hz – 100 kHz / 0 dB ~ -3 dB

Crossover Frequency (Variable, L.P.F / H.P.F / OFF Selectable)

  • 1/2 ch: 30 Hz – 400 Hz (-12 dB / oct)
  • 3/4 ch: 30 Hz – 400 Hz (-12 dB / oct)
  • Input Sensitivity (V / at 10k ohms): 0.2 V – 4.0 V with Input Level

Dimensions

  • Width: 257.0 mm (10-1/8?)
  • Height: 50.8 mm (2?)
  • Depth: 192.0 mm (7-9/16?)
  • Weight: 2.88 kg

 

Sound In Motion are Authorised Alpine Electronics Australian Dealers, Stockists and Installation Centres on the Sunshine Coast.