Nambour 07 54762899 | Noosaville 07 54424833 sales@soundinmotion.com.au
Sale!
Alpine PDx-V9GC
Alpine PDXV9GC

Alpine PDX-V9GC GOLD 5chl Audiophile Amplifier

$949.00 $649.00

Audiophile 5 Channel Amplifier

Sound In Motion the Home of Alpine on the Sunshine Coast

Out of stock

Product Description

Alpine PDX-V9GC

5chl Audiophile Amplifier

Alpine PDX-M12GC - Mono Block Amplifier - Sound In Motion

The New PDX Professional Series are a special collection that elevates PDX amplifiers to new heights of prestige with their new luxurious and gorgeous gold aluminium finish.

The first true audiophile D-class amplifiers have never been so remarkably beautiful and elegant.

Noteworthy Mention

2010 Innovations AwardThe Alpine PDX Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category.

 

 

Alpine PDXV9GC

This sleek and stylish amplifier has been re-designed from the ground up to deliver an amplifier that not only look amazing, it performs flawlessly.Incorporating new technology to maximise sonic quality, the new PDX amplifiers deliver extremely low distortion levels, wide bandwidth and industry leading S/N ratios. The new PDX amplifiers have an exceptionally high damping factor, more than 500 for the multi-channel Alpine PDX-V9GC. What’s more, the all-new PDX amplifiers are 20% smaller than the first generation models and their unique stacking design allows for a large multi amplifier system to be installed virtually anywhere.

New Reference Grade Output Stage

Ultra-Wide Frequency Response

This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB), and 3Hz~100kHz (+0dB, -3dB), Mono: 3Hz~600Hz (+0dB, -3dB) for 5ch.

Ultra-Wide Frequency Response

Total Harmonic Distortion(THD+N) vs. Power

The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for both low distortion and wide frequency response. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, PDX-F4, and PDX-V9 are synonymous with extremely high resolution and detail.

Total Harmonic Distortion(THD+N) vs. Power

Total Harmonic Distortion(THD+N) vs. Frequency

Uniquely PDX, distortion actually decreases at higher frequencies, resulting in a clean and clear signal where your ear is most sensitive to distortion. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power.

Total Harmonic Distortion(THD+N) vs. Frequency

Signal to Noise

These amps are capable of unheard of S/N ratios up to 95dB S/N @ 1W, 122dB S/N at rated power for extremely clean, uncolored sound. Forget unwanted background noise or static. The PDX amps deliver crystal clear music every time.

Damping Factor

With ultra-low output impedance, the new PDX offers extremely controlled, tight bass for unprecedented sound quality. Ratings are >500 for 4ch and >1000 for the sub.

Power Output to the Extreme

Beefed up Power

Beefed up Power

The PDX power supply delivers tremendous headroom with low distortion and noise. PDX amplifiers have an extremely high total system efficiency of ~80% (power supply is rated at >90%, output stage is rated >90%).

Low Impedance Stability

These amps are stable at low impedances and are capable of their rated power from 2 to 4 ohms for all models. This allows excellent flexibility with multiple speaker and subwoofer loads and is adjusted automatically.

Low Impedance Stability

Certified Power From Birth, Guaranteed.

Each PDX amplifier comes with its very own birth-sheet. PDX amplifiers are tested and documented to show their true actual output.

Power Management Processor

Power Management Processor

PDX amps incorporate Alpine’s new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature and output to ensure uninterrupted power output for non-stop listening.

Power Output to the Extreme (cont.)

Power Management Processor

If the amp gets too hot, the Thermal Protection circuit kicks in and gradually decreases output power until it cools down. Once cool, the power output automatically increases back to the previous level. If the circuit detects a Low Battery condition, it will gradually decrease power output if battery voltage becomes too low. Once the battery voltage increases, power will be restored. This interruption-free design allows for non-stop enjoyment with no hiccups or drop-outs, just clean, clear output.

Application Flexibility

Unique Stacking System

The new PDX series amplifiers are 20% thinner than previous models at only 2” thick. New stacking system packs the amps closer together so there are no gaps and to save space in the trunk while directly coupling the amps heatsinks to help share cooling duties.

Unique Stacking System

Speaker terminals

The super high power speaker connectors allow for up to 8GA wiring and have a unique quick disconnect design for simple error-free installation.

Speaker terminals

Power Connector

Power Connector

The new removable connector features a low-loss, high-current design. It accepts up to 4GA wire, to ensure your amp gets the power it needs while allowing for easy installation.

Remote Control Bass Knob (RUX-KNOB)

Remote Control Bass Knob

Simply add the RUX-KNOB (sold separately) to a PDX-M6, PDX-V9, or PDX-M12 and get full control from inside the dash for remote on-the-fly bass adjustments. You also have the ability to control multiple amps from just one controller with simple telephone cord adapters.

A Touch of Personalization

PDX amplifiers come with removable trim rings, allowing them to be easily custom painted to match your vehicle or personalized to anything you want. Add it as another Do-It-Yourself project, or leave it to professionals and ask an Authorized Alpine retailer/installer near you.

A Touch of Personalization

Alpine PDX-V9GC -Features

Install
  • Connectors: Quick Connect Terminals for Power Supply and Speaker Output
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Smart Installation

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4-channel + 1-channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Pre-Amp Stage: Discreet
  • Final Outputs: MOSFET
  • Crossover: Variable High Pass, Low Pass and Band Pass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Subsonic Filter: Variable Subsonic Filter
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Low-battery Protection
  • Low-impedance Possibility
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Board Design: 6-layer Glass Epoxy PC Board
  • Power Indicator: Top Mounted LED Power/Status Indicator
  • Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
  • Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
  • Thermal Control: Thermal Management Control

 

Alpine PDX-V9GC -Specifications – CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)

Max Power Output Ratings

  • Max Power: 1600W

RMS Power Ratings

  • Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)
  • Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)
  • Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)

Sound Tuning

  • Crossover Frequency (CH1/2, HPF): 30 – 600 Hz (x1), 300 – 6k Hz (x10), -12 dB/oct.
  • Crossover Frequency (CH3/4, HPF): 30 – 600 Hz (x1), -12 dB/oct.
  • Crossover Frequency (CH3/4, BPF): 30 – 600 Hz (HPF), 300 – 6k Hz (LPF), -12 dB/oct.
  • Crossover Frequency (Subwoofer): 50 – 600 Hz, -24 dB/oct.
  • Subsonic Filter: 3 – 30 Hz, -24 dB/oct.

Dimensions

  • Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm
  • Foot Print (WxHxD) in: 10-1/8” x 2” x 7-1/2”

General

  • Power Requirements: 14.4 V.DC (11-16 V allowable)
  • Input Sensitivity (RCA Input): 0.2 – 4 V (CH1/2, CH3/4), 0.1 – 4 V (Subwoofer)
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms):
    • CH-1/2/3/4: 3 – 100k Hz
    • Subwoofer: 3 – 600 Hz
  • THD+N (10W into 4 Ohms):
    • CH-1/2/3/4: <0.005 %
    • Subwoofer: <0.006 %
  • THD+N (Rated Power into 4 Ohms):
    • CH-1/2/3/4: <0.03 %
    • Subwoofer: <0.05 %
  • Damping Factor:
    • CH-1/2/3/4: >500 into 4 ohms at 100Hz
    • Subwoofer: >1000 into 4 ohms at 100Hz
  • Signal to Noise (Rated Power into 4 Ohms):
    • CH-1/2/3/4: 112 dB
    • Subwoofer: 119 dB
  • Weight: 2.7 kg

*Note: Specifications and design are subject to change without notice.

Amazing Sound Quality

The PDX-V9GC is a winner in terms of sound quality. Its specifications show that it achieves ultra-low distortion of 0.005%, S/N ratio of 112dB, damping factor of over 1000 and bandwidth of 3Hz–100kHz. Listening tests confirm that noise is non-existent, musical definition and detail are sensational, and the sound is so clear as to be transparent – truly awesome performance from a high-power amplifier.

Outstanding System-Building Flexibility

 

The PDX-V9GC gives you the flexibility you need to meet any customer request. In addition to the normal 4.1-Channel system, this amp makes it easy to create an active front 2-way + Subwoofer system, a bridged connection system or a 2.1-Channel system. What’s more, the Selectable Input Channel Switch lets you change the number of input channels, making 5- or 4-Channel output possible with only 2-Channel input.

Remote Bass Control

The PDX-V9 has a Remote Bass Control port for attaching the Remote Control Bass Knob (RUX-KNOB), sold separately. It provides 20dB of bass level adjustment that can be easily dialed up and down. The RUX-KNOB comes with a 5m cable for installation in any convenient location.

 

Alpine PDX-V9GC – SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)

Max Power Output Ratings

  • Max Power: 1600W

RMS Power Ratings

  • Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)
  • Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)
  • Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)

Sound Tuning

  • Crossover Frequency (CH1/2, HPF): 30 – 600 Hz (x1), 300 – 6k Hz (x10), -12 dB/oct.
  • Crossover Frequency (CH3/4, HPF): 30 – 600 Hz (x1), -12 dB/oct.
  • Crossover Frequency (CH3/4, BPF): 30 – 600 Hz (HPF), 300 – 6k Hz (LPF), -12 dB/oct.
  • Crossover Frequency (Subwoofer): 50 – 600 Hz, -24 dB/oct.
  • Subsonic Filter: 3 – 30 Hz, -24 dB/oct.

Dimensions

  • Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm
  • Foot Print (WxHxD) in: 10-1/8” x 2” x 7-1/2”

General

  • Power Requirements: 14.4 V.DC (11-16 V allowable)
  • Input Sensitivity (RCA Input): 0.2 – 4 V (CH1/2, CH3/4), 0.1 – 4 V (Subwoofer)
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 – 100k Hz
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 – 600 Hz
  • THD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %
  • THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %
  • THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %
  • THD+N (Rated Power into 4 Ohms) for Subwoofer: <0.05 %
  • Damping Factor for CH-1/2/3/4: >500 into 4 ohms at 100Hz
  • Damping Factor for Subwoofer: >1000 into 4 ohms at 100Hz
  • Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dB
  • Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dB
  • Weight: 2.7 kg

Alpine PDX-V9GC – FEATURES

Install

  • Connectors: Quick Connect Terminals for Power Supply and Speaker Output
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Smart Installation

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4-channel + 1-channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Pre-Amp Stage: Discreat
  • Final Outputs: MOSFET
  • Crossover: Variable High Pass, Low Pass and Band Pass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Subsonic Filter: Variable Subsonic Filter
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Low-battery Protection: Low-battery Protection
  • Low-impedance Possibility: Low-impedance Possibility
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Board Design: 6-layer Glass Epoxy PC Board
  • Power Indicator: Top Mounted LED Power/Status Indicator
  • Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
  • Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
  • Thermal Control: Thermal Management Control

 

 

Sound In Motion are Authorised Alpine Electronics Australia Car Stereo Specialists and Installation Centres on the Sunshine Coast.