Nambour 07 54762899 | Noosaville 07 54424833 sales@soundinmotion.com.au
Focal ES 165 KX2
kevlar_cone_speaker_k2powertweeter_tkmx_visuel-6_500x418_gauche

Focal ES 165 KX2 – 2way Component Speakers

$1,099.00

Premium 2way Component Speakers

Product Description

Focal ES 165 KX2

6½” TWO-WAY COMPONENT SPEAKER KIT

 

The Focal ES 165 KX2 component kit is composed of two 165 mm (6½”) woofers with Kevlar® cones providing an extremely rich and punchy sound.

The centre of the cone is equipped with a phase plug for improved sound dispersion around the vehicle.

The two “M”-shaped aramid-fibre TKMX inverted dome tweeters are equipped with bi-amplified crossovers. This enables perfect control over the high end for providing very smooth treble with perfect definition.

Thanks to its excellent power handling, this kit is the reference product of the K2 Power range.

It even won over the hearts of the experts when it was officially revealed at the CES in Las Vegas, and received the CES Innovation 2016 award.

The kit is supplied with aluminium and mesh grilles.

 

EXCEPTIONAL SOUND FOR YOUR VEHICLEes165kx3_visuel-5_500x353_droite

The speaker drivers used for the K2 Power have been completely redesigned.
Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision!

KEVLAR® CONE

Precision and dynamics

The K2 Power Kevlar® cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar® aramid fibres, and a layer of glass fibres, the K2 Power cone combines three key factors of quality acoustics: Rigidity / Lightness / Damping, for precise and dynamic sound.

 

NEW “M”-SHAPED TWEETER

For a precise and smooth high end

tweeter_tkmx_visuel-6_500x418_gauche

The new K2 Power TKMX tweeter features an exclusive “M”-shaped structure.

This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance.

 

 

 

TMD SUSPENSION

Say goodbye to distortiones165kx3_visuel-7_500x239_droite

Initially developed for Sopra high-fidelity loudspeakers, TMD suspension (Tuned Mass Damper) features a special structure designed to control unwanted resonance and drastically reduce the harmonic distortion caused by the stress the cone is subject to. This patented technology endows the speaker driver with a very realistic mid-range with great definition.

 

 

 

 

“Radial VC” cooling for higher SPL

k2power_techno_ventilationThe new Radial VC cooling system for speaker driver voice coils expels hot air from the voice coil towards the bottom of the magnet through 6 holes.

This improves control over the voice coil temperature, limiting the effects of thermal compression and improving reliability.

This significantly increases the efficiency of the speaker driver. It also improves dynamics and produces a more powerful sound.

 

 

 

 

 

Progressive spider profile Improved linearity and precision

k2power_techno_spiderThe progressive spider profile of K2 Power speaker drivers is designed to provide a full-bodied sound at low levels and to increase linearity, precision and dynamic range.

 

 

 

 

 

An optimised crossover for improved reliability

k2power_techno_crossover_filtreThe components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation.

components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.

 

 

 

 

 

Made in France

Designed and developed in France

>Designed and developed in France

K2 Power speaker drivers and tweeters have been designed and developed by our engineers in our Research & Development laboratory in France.

K2 Power Speaker Drivers and Tweeters manufactured in Saint-Etienne

K2 Power Speaker Drivers and Tweeters manufactured in Saint-Etienne

The Kevlar® cone, the speaker drivers and the tweeters of the K2 Power line have been manufactured and assembled in our workshop in Saint-Etienne, France.

Quality control in their workshops in France

Quality control in our workshops in France

All K2 Power products are subject to strict quality control procedures throughout the production line in order to guarantee unique acoustic quality.

 

 

 

 

 

Sound In Motion, your local Authorised Focal Dealers, Stockists and Installation Centres on the Sunshine Coast