Rockford Fosgate M600-5
Prime Marine 600 Watt 5-Channel Amplifier
The Rockford Fosgate M600-5 is a 600 watt marine grade “all-in-one” amplifier featuring four full-range stereo channels and a dedicated mono subwoofer channel.
- Class A/B technology (4 channel)
- Class-D technology (sub channel)
- Remote Punch Level Control (sub channel) included
- RCA and high level input with 2/4/5 channel select
- 12 dB/Oct Butterworth crossovers
- On board Punch EQ control
- Separate Front, Rear and Sub gain control
- Real time output and power supply thermal sensing
- Cast aluminum heat sink
- 4 AWG power/ground connectors
- MOSFET power supply
- Over current and short circuit protection
- Marine grade two part epoxy coating on circuit boards
- Muted turn on
- 2 Year Standard Warranty
The Prime Rockford Fosgate M600-5 is a 600 Watt amplifier specifically designed for Marine and Motorsport applications through its 2-part epoxy coated Printed Circuit Board (PCB).
The four stereo channels feature Class-A/B topology and the dedicated subwoofer channel runs on high efficiency Class-D.
High level and low-level RCA inputs allow for flexibility and the on-board Punch EQ, built-in 12dB crossovers, and independent gain controls permit precise tuning.
Real time output and thermal sensing along with current and short circuit protection protect the amplifier under adverse conditions.
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.
An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.
Class A topologies area great for sound quality but can require alot of current. Class B designs are great for power delivery. Amplifier designs utilizing a Class A/B topology reaps the benefit of great sound quality in the front-end (preamplifier stage) while delivering great power in the output stages (MOSFET drivers).
High efficiency amplifier design that reduces current consumption from the charging system.
Element Ready – Amps
These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.
Our Moto-marine amplifiers have not only the capabilities you expect a Rockford Fosgate amp to have, but we have designed them to stand up to the environmental conditions you are likely to subject them to. With corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with you in mind. Whether on the lake, on the road or in the back woods these amplifiers are ready for an adventure.
Dust – We make sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.
UV Inhibitor Materials – Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.
Corrosion Protection (Electronics) – Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.
Stainless Hardware – Stainless hardware is used due to its natural resistance to corrosion and rusting. This ensures that electrical connections will not degrade over time due to exposure to the elements.