RUST STOP RS5 (12v) Standard – Electronic Rust Protection


Electronic Rust Protection.


Rust Stop RS5 (12v) Standard

Electronic Rust Protection – 4 x Anodes for Sedans, small SUVs etc.



  • 24 Hour Protection for your car, 4WD, ute, truck, bus etc.
  • 100% of Metal Protected inside and out, where sprays cannot reach
  • Separate Two-Channel Output gives intelligent protection where you need it most
  • Combines two proven technologies making it effective in all conditions


Rust Stop RS-5 Features

    • Designed by technical team with over 50 years combined experience in electronic rust protection and electronic rust prevention.
    • RustStop® RS-5 uses a dual technology to be effective in all conditions.
    • The Anodes (Rust Magnets™) give customers visual proof that the system is working by the obvious anode corrosion that occurs (anodes typically need to be replaced every 4 years); Click here to see images of anode corrosion.
    • Suitable for New and Used vehicles

RUST STOP RS_5 Standard

electronic rust protection and electronic rust prevention

  • It helps protect the entire car, inside and outside, which sprays cannot do;
  • RustStop® RS-5 even helps control formed rust from spreading via electronic rust control;
  • Spray-on coatings often need be re-applied over time, whereas electronic rust protection is permanent.
  • Electronic rust proofing will compliment any other undercoating or spray-on type rust proofing, increasing your protection, as electronic rust protection can only improve your rust defence.
  • Transferrable from vehicle to vehicle;
  • Simple 5-Step Installation, no special tools needed;
  • Available in 12V and 24V models suitable for cars, trucks, buses, trucks etc.
  • RustStop® RS-5 has four indicator lights i.e. Operate Light, Fault Light, Max Output and Battery Low Light.
  • Draws minimal current from the battery
  • Will not interfere with other electrical installations
  • Ten (10) Year Product Warranty
  • Testing and Testimonials
  • Heriot Watt University, United Kingdom
  • Shogun Testing Facilities
  • Electronics Incorporated (Safety Tests)
  • Sapref (Shell and BP, South African Petroleum Refineries)
  • Engen Refinery
  • Flamingo Plant Hire (A Barloworld Company)

RUST STOP RS-5 How it Works


For rust to form, there needs free-electrons, moisture and oxygen present. If any of these are missing, rust cannot form. The free-electrons are negatively charged, so the strong positive charge on the Anodes (Rust Magnets™) cause an attraction of negative free-electrons away from the vehicle and the anodes now corrode rather than the vehicle. This reduces the rusting process on the vehicle.


Any steel contains millions of free-electrons which are negatively charged and move around in the metal due to positive and negative charge differences caused mainly by impurities in the steel.
These small charge differences (normally around 1 volt) act almost like a magnet, and so the negative free-electrons are attracted toward and accumulate at the positive points.
When these free-electrons are exposed to oxygen and moisture, a reaction occurs and they are lost from the steel. This reaction is known as oxidation or RUST.
RustStop® RS-5 outputs a positive charge onto the Anodes (Rust Magnets™), approximately 50 times greater than that between the impurity and iron atoms. The iron and impurity atoms are now effectively all negatively charged in relation to the strong positive charge on the Anodes (Rust Magnets™) and so the free-electrons are attracted toward the Anodes (Rust Magnets™).
The Rust Magnets™
now corrode rather than the vehicle.


Sound In Motion, Your Loacl Authorised Rust Stop Dealers, Stockists and Installation Centres on the Sunshine Coast