Alpine SWX-1243D Type-X 12″ Subwoofer

Premium 12″ Subwoofer

 

Sound In Motion the Home of Alpine on the Sunshine Coast

This product has been discontinued.

Description

Alpine SWX-1243D

Type-X 12″ Subwoofer

Alpine SWX-1243D Type-X 12″ Subwoofers = Extreme Performance.

Type-X_SW
If you are looking for a high-quality subwoofer with the most accurate and precise in-vehicle subwoofer performance, then look no further. Alpine’s 2nd generation state-of-the-art Alpine SWX-1243D Type-X 12″ Subwoofers are your answer.

These top-of-the-line subwoofers deliver exceptionally powerful, yet tight and accurate bass. Their ultra-high performance and efficiency comes from an ultra-lightweight cone and large strontium magnet, and they include a unique venting system for better cooling.

 

Type-X Aerospace Material Cone

The Kevlar-Rohacell cone is made of lighter and stronger material than previous models, for less moving mass and greater efficiency. The underside…

With the advanced motor structure and new sound of these subs, you will experience higher efficiency, lower heat creation while maintaining superb sound, so you can really crank up the bass.

 

Type-X Large Stronium Magnet

A Specially designed, advanced motor structure and extra-large, triple-stacked stronium magnets ensure that these subwoofers are very efficient.

In fact, stronium magnets are used in smaller speakers for their efficiency; using large stronium magnets in subwoofers results in extremely high performance.

 

Type-X High-Amplitude Multi Roll Surround

In order to handle extra-high SPL, the suspension has to travel far and still maintain control.

Most designs sacrifice cone area for a wide surround, or sound quality for a tall surround.

The High-Amplitude Multi Roll Surround is formed from injection-moulded multi-roll Santoprene, enabling both a larger cone area for higher SPL and greater cone excursion for better sound quality.

 

Type-X Easy-Access Terminals

Simple jumpers with solid-insert, gold-plated terminals make it very easy to configure these subwoofers for series or parallel applications.

Dual-woven tinsel leads with terminals on the same side can handle heavy gauge speaker wire.

 

Pair up with an Alpine PDX-M12 Amplifier for a perfect power match

Power Handling (RMS/peak): 1000W/3000w

The Alpine SWX-1243D Type-X 12″ Subwoofers are the top-of-the-line subwoofers that deliver exceptionally powerful, yet tight and accurate bass.

Their ultra-high performance and efficiency comes from an ultra-lightweight cone and large strontium magnet, and they include a unique venting system for better cooling.

 

Alpine SWX-1243D – Features

  • High-strength Kevlar-Rohacell Cone
  • Large Strontium magnet
  • High-Amplitude Multi-Roll Surround
  • Gold-Plated Easy-Access Terminals for heavy-gauge speaker wires
  • Easy jumper configuration

Alpine SWX-1243D – Specifications

Power Handling

Power Handling (RMS/peak): 1000W/3000W

  • Power Range (RMS): 500W-1000W

General

  • Diaphragm Material: Kevlar Rohacell Layered Composite
  • Frequency Response (Hz): 24Hz-200Hz
  • Spider Material: Nomex

Dimensions

  • Size: 12″

Recommended enclosure sizes for optimum bass output

  • Sealed Enclosure:
    • Recommended: 25.5L
  • Vented Enclosure:
    • Recommended Volume: 51.0L
    • Round Port Dia. x L (cm): 10.2 x 40.6
    • Slot Port W x H x L (cm): 35 x 2.33 x 40.6

* 1 Year Warranty as per Alpine Electronics Australia Terms and Conditions

 

Sound In Motion, your local Authorised Premium Alpine Car Sound Specialists, Stockists and Installation Centres on the Sunshine Coast